Cinch Part # Ce-4RO

CeLAN 4-Relay Output Module

CeLAN 4-Relay Output Module
The CeLAN 4-Relay Output Module provides the security options needed to maintain the integrity of the system, while allowing the connectivity needed to enhance the reporting, maintenance, and flexibility of the system.

The CINCH Systems CeLAN 4-Relay Output Module expands the versatility of Protector Panel by adding:

- Four (4) Form-C relays that are fully programmable and controllable by the Protector System
- Two (2) hardwire input zones for conventional hardwire devices.
On Protector Systems, you can control up to 100 different relays using a variety of different combinations of modules.
You can also connect multiple modules to a single panel for up to 250 input points. Both normally open and normally closed devices can be wired to an input zone. The module monitors all zones and alerts the panel if there is an open/short circuit by using a 3.0K ohm end-of-line (EOL) resistor on each loop input. For additional security, a magnetic reed switch can be added and connected to one of the module's input zones to provide module tamper protection.

The CeLAN 4-Relay Output Module comes with two 3.0K ohm EOL resistors and mounting hardware (screws and anchors).


Power for the CeLAN 4-Relay Output Module is provided by:

- Protector 12 VDC CeLAN power terminals,
- CeLAN Remote Power Supply Module, or
- Separate 12 VDC-power supply capable of delivering up to 180 mA.

CeLAN AES encrypted digital data bus technology provides secure, fast and reliable data transfer between the Protector Panel and CeLAN modules.

Features:

- AES Encrypted CeLAN communications
- Four (4) Form-C relays that are fully programmable and controllable by the Protector System
- Two (2) fully supervised style A (Class B) fire rated hardware input zones per module
- Five (5) state zones:  [Open Circuit, Supervised Circuit (3k EOL), Short Circuit, Ground Fault High, Ground Fault Low]
- On-board LED power and CeLAN bus status indicators.
- CeLAN AES encrypted technology for security, easy setup and enhanced performance
- Can be mounted in all compatible cabinet enclosures (Sold Separately).
- 'CINCH Stick' Field Upgradeable software
Accessories:
CINCH-On 4-Relay Output Module Tester / Demo Interface

CINCH-On CeLAN 4-Relay Output Tester / Demo Interface

- Allows for the easy testing and configuration of a CeLAN 4-Relay Output Module

- When connected allows for the testing of the input zone and verification of the output programming of the four module relays.

- Zone can be tested in the Normally Open or Normally Closed configuration

- All Zone states can be demonstrated including GFH (Ground Fault on the High side of the zone) and GFL (Ground Fault on the Low side of the zone)